Bixby Developer Center

These sample graphs show action flows of a simple voice intent, such as "Turn on air conditioner" or "Set the volume to 10 on Speaker".

Turn On the Device

This sample graph helps turn on the device and trigger a response based on the execution result.

Example: The user says, “Turn on the air conditioner.”

If the command works, Bixby says Got it. Okay. Otherwise, Bixby gives an error message.

Copy

See: Sending a Device Command

Set the Brightness of the Device

This sample graph helps validate user input and set the brightness of the device.

Example: The user says, "Set the brightness of the light to 30."

1. Bixby validates the input value of 30, using the Between node.
2. If the value falls within the range of 0 to 100, it sets the brightness using the Command node. Otherwise, the Out of range dialog displays, and the brightness doesn’t change.
3. If the command works, Bixby says Got it. OK. Otherwise, Bixby says Hmm. Let’s try that again.

Copy

See: Sending a Device Command With an Argument

Increase the Brightness of the Device by a Value

This sample graph helps increase the brightness of the device by a specific amount.

Example: The user says, "Increase the brightness of the light by 10."

1. Bixby gets the current brightness value of the device using the Attribute node.
2. After adding the input value of 10, it validates the new brightness value using the Between node.
3. If the brightness value falls within the range of 0 to 100, it sets the device brightness to that value using the Command node. Otherwise, the Out of range dialog displays, and the brightness doesn’t change.
4. If the command works, Bixby says Got it. Okay. Otherwise, Bixby gives an error message.

Copy

See: Arithmetic Operations Using the Sum Node

Play the Next Song on the Device

This sample graph helps play the next song on the device.

Example: The user says, "Play the next song on the speaker."

If the command works, Bixby says Got it. Okay. Otherwise, Bixby gives an error message.

Copy

See: Sending a Device Command

Tell Me the Fine Dust Level of the Device

This sample graph helps get the fineDustLevel value of the device.

Example: The user says, "Tell me the fine dust level of the Air Monitor."

1. Bixby gets the fineDustLevel value using the Attribute node.
2. Bixby gets the value of the locationName using the Device Information node.
3. Based on these values, Bixby creates the response dialog.

Copy

See: Creating a Bixby Response Using Device Status

Change the Humidity of the Device

This sample graph helps change the humidity level of the device based on the user's fan mode selection.

Example: The user says, "Change the humidity level of the Air Conditioner."

1. Bixby gets the list of supportedAcFanModes, and prompts the user to select a mode using the Ask Selection node.
2. Bixby sets the fan mode based on the user's selection using the Command node.
3. If the command works, Bixby says Got it. Okay. Otherwise, Bixby gives an error message.

Copy

See: Prompting Users With Ask Nodes

Set the Device Fan Mode to Auto

This sample graph helps control a device based on its feature parameters (such as dustHealthConcern or airQuality). It helps set the device's fan mode based on the dustHealthConcern value.

Example: The user says, "Set the Air Purifier's fan mode to auto."

1. Bixby gets the dustHealthConcern value of the device with the Attribute node.
2. Bixby maps this value to a fan mode of the device using the Select node.
3. It sets the selected fan mode using the Command node.
4. If the command works, Bixby says Got it. Okay. Otherwise, Bixby gives an error message.

Copy

See: Creating a Bixby Response Using Device Status

Set the Volume of the Device to a Value

This sample graph helps set the volume of a device with a specified input value. It also asks for a confirmation if the desired volume might be too loud.

If the input value is greater than the current one and falls in the range of 80 to 100, Bixby asks the user to confirm their choice using the Ask Confirmation node.

If the input value is less than the current one and falls within the range of potential setting values, Bixby sets the volume to the input value without a prompt for user confirmation.

Example: The user asks, "Set the volume of the speaker to 10."

1. Bixby determines that the input value is less than the current value and falls within the range of potential device setting values.
2. Bixby sets the volume to 10.
3. If the command works, Bixby says Got it. Okay. Otherwise, Bixby gives an error message.

Copy

See:

• Sending a Device Command With an Argument
• Prompting Users With Ask Nodes

Turn on TV Channel

This sample graph helps change the TV to a specified channel by name.

Example: The user says, "Turn on PBS."

Bixby then sets the TV channel to PBS.

Copy

See: Sending a Device Command

Set a Cooling Setpoint With or Without Temperature Unit

This sample graph helps set the cooling setpoint temperature on a device, even without the unit of measure. If a user tries to establish the setpoint without a unit of measure, the device uses the current unit as the default.

Example: The user says, "Set the cooling temperature to 20."

Even though the unit of measure isn't specified, Bixby uses the current default temperature the device is using.

Copy

See:

• Sending a Device Command
• Creating a Bixby Response Using Device Status
• Concatenating Actions